Fast & Loosening

Lag Driver DL 210 H

Fast efficient loosening and tightening of lag bolts

The lag driver allows loosening and tightening of lag bolts while in a standing position to reduce back strain. The lag driver is fast and efficient so the job can be completed quickly. Adapters are available for dome, torx, square and exposed rectangular lag bolts.

Benefits

  • Install and remove lag bolts while in a standing position allows high operator comfort
  • Adapters for dome, torx, square and rectangle lag bolts allow flexible and efficient execution of maintenance work
  • Lightweight design enables one-man operation

Impact Wrench WI 110 H

Easy fast loosening and tightening of bolts and nuts

The impact wrench enables the easy and fast loosening and tightening of bolts and nuts. The flip over handle allows for increased operator comfort. The rugged design incorporates an integral motor and heavy-duty mechanism for the rigors of track maintenance.

Benefits

  • Usable in a vertical and horizontal position through a swing handle
  • Vibration damped cushion grips increase ergonomics
  • Efficient and powerful hydraulic engine with 2,800 ft. lbs / 3,800 Nm of torque

Impact Wrench WI 100 P

Easy handling and highly flexible loosening and tightening of bolts

The lightweight wrench is driven by an powerful 2 cycle engine which produces up to 1250 ft lbs of torque. The tool is equipped with vibration reducing grips for greater operator comfort and can be used horizontally or vertically.

Benefits

  • Lightweight design allows one-man operation and easy transportation
  • 4-stroke engine enable easy handling and high flexibility
  • Powerful machine which allows to loosen tough nuts and bolts and quickly re-torque them back on

Dead Head Driver DH 105 H

More comfort and improved ergonomics with removal of broken spikes, screws and bolts

The dead head driver offers a high rate of blows per minute which enables easy removal of broken spikes, screws, through bolts and hook bolts. Standing operation reduces back strain common with other methods of removal. It eliminates the use of hand held punches and hammers reducing the likelihood of injury. The tool can also be fitted with additional bits for chipping ice or tie tamping.

Benefits

  • Flexible usage through drive broken spikes, screws, through bolts and hook bolts
  • Standing operation reduces back strain
  • High operator safety through the eliminates of the use of hand held punches and hammers

Spike Setter SS 100 M

User-friendly and ergonomic spike setting before driving

The spike setter is designed for setting spikes into ties before driving. The tool enables the user to work in a standing position. The cushion grips allow the operator to set spikes with less fatigue. The magnetic holder secures the spike for placement.
 

Benefits

  • Telescoping main tube enables to work in a standing working position
  • Cushion grips allows the operator to set spikes with less fatigue
  • Magnetic spike holder and slide hammer secures the spike for placement and increased user-friendliness

Spike Tester ST 1000 M

Lightweight tool to safely determine broken or loose spikes

The spike tester is designed to determine broken or loose spikes. The lightweight design allows for ease of use. The spike tester eliminates the use of a heavy claw bar and is safer than traditional methods.
 

Benefits

  • Lightweight design allows operation and transport with ideal body posture
  • Design simplifies testing of spikes and eliminates the use of heavy claw bar

Spike Puller PS 210 H (Single Stage) / PS 310 H (Two Stage)

Simple and efficient spike pulling

The spike puller provides the ultimate in spike removal. Spike extraction can be accomplished from any position making spike pulling simple and efficient.

Benefits

  • Rotating handle allows operator to select most comfortable position to pull spikes
  • 90-degree swivel hose connection protects the hydraulic hoses against kinking and breaking
  • No need for set-up through whip hoses and standard jaws included in standard scope of delivery

Spike Driver DS 110 H

Fast and efficient driving of spikes

The spike driver is one of the most efficient tools in the market with its 1050 blows per minute. This lightweight tool guarantees the best ergonomics and ease of use. The 67 lbs / 30 kg weight allows for easy transportation. Anti-recoil technology and anti-vibration handles allow for a more ergonomic operation.

Benefits

  • Anti-recoil technology and anti-vibration handles isolates the operator from the tool’s vibration, whereby reducing operator fatigue
  • 1" shank size allows the usage of optional tools and offers high flexibility
  • Lightweight design allows one-man operation

Service

Are you interested in our range of products and services or have questions? Please contact us. We will be glad to help you.